Mingxing Ceramics has years of experience designing and developing Ceramic Shaft solutions for a wide variety of applications and industries.
Ceramic Shaft is the most widely applied and cost-effective pump shaft. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. Ceramic Shaft is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes Ceramic Shaft for pump insoluble in water and slightly soluble in strong acid and alkaline solution.
Mingxing Ceramics offer this expertise to all of our customers to ensure the best design and materials are chosen for their specific applications and needs.
Ceramic Shaft Specifications | ||||
---|---|---|---|---|
Material | 95% Alumina ceramics | 99% Alumina ceramics | SiC Ceramics | YSZ |
Density | 3.6-3.75g/cm3 | 3.9-3.92g/cm3 | 3.1g/cm3 | 6.05g/cm3 |
Machining accuracy | The outside diameter tolerance ±0.005 | The outside diameter tolerance ±0.005 | The outside diameter tolerance ±0.005 | The outside diameter tolerance ±0.005 |
Surface roughness | Ra 0.2-0.4 | Ra 0.2-0.4 | Ra 0.2-0.4 | Ra 0.2-0.4 |
Performance | wear-resisting alkali-resisting | Wear resistance, acid and alkali resistance | Wear resistance and acid resistance | Wear resistance |
Application | used in pumps | used in pumps | used in pumps | used in pumps |
For wet running, they outperform steel because the ceramic impeller shaft is extremely hard and are able to grind up and disperse foreign materials such as limescale, rust or sand particles that happen to get into the bearing area.
● High heat resistanceHigh material thermal stability, very low CTE offering dimensional stability.
● High wear resistanceLow coefficient of friction, and extreme resistance to wear during high-speed rotation (>3,000rpm) in abrasive fluid systems.
● High electrical insulationAlumina, being chemically inert and insulating, avoids both electrochemical and electrolytic action of Ceramic Shaft.
● High corrosion resistanceExceptional corrosion resistance in aqueous-based pumping applications, therefore not affected by corrosion inhibitors or aggressive environments.
● High stable chemical propertiesAlumina, being chemically inert and insulating, avoids both electrochemical and electrolytic action of Ceramic Shaft.
● High purity resistanceCeramic Shaft for pump made of 95% pure alumina is used in small pumps. The applications for these pumps vary from chemical handling to heating water circulation, garden pond and fountain pumping and even for use in aquariums.
Mingxing Ceramics manufactures and provides alumina ceramic components for a wide range of applications like Mechanical Equipment, Electronic & Electrical, Oil Drilling, Medical, Chemical Industry, etc. According to actual application and customer's requirement, the purities vary from 95%-99%, and the forming methods will be different. The forming methods applied in our plant include dry pressing, isostatic pressing, injection molding, extrusion molding. With experienced engineers and talented workers, we are confident to offer high quality, high precision, complex ceramic components for customers worldwide.
Positive Temperature Coefficient is a kind of semiconductor thermal ceramics. Its characteristic is sensitive to temperature. It shows negative resistance when it is lower than the Curie temperature; when it reaches the Curie temperature, its resistance value begins to increase sharply. When used as a heating material, it has the following superior characteristics: automatic constant temperature, no oxygen consumption, corrosion resistance, etc. PTC ceramics are mainly doped barium titanate semiconductor ceramics, which have relatively small ionization energy and can be thermally excited to generate conductive carriers at room temperature, thereby forming semiconductors.
2020-11-11Zirconia precision ceramic material has the characteristics of high temperature resistance, chemical corrosion resistance, oxidation resistance, wear resistance, large thermal expansion coefficient, small specific heat and thermal conductivity, and toughening characteristics after stabilization. The following Kezhong Ceramics is good for everyone Introduce the compressive strength and flexural strength of zirconia precision ceramics at high temperature.
2020-11-03With the development of materials science and the improvement of people's aesthetic awareness, all-ceramic restorations have been widely used because of their good aesthetic properties. Zirconia ceramic restorations have gradually become the first choice for restoration of posterior tooth defects due to their good mechanical properties, biocompatibility, less impact on the results of radiological medical examinations, and less wear on the natural teeth of the opposite jaw.
2020-10-27Alumina ceramic materials generally have fairly large elastic modulus, high hardness, high brittleness, and strong crack sensitivity. Therefore, alumina ceramics have certain processing difficulties. What should be paid attention to during the processing.
2020-10-20How alumina ceramics beat metalThe new generation of industrial parts is alumina ceramics, which will replace traditional metal parts, because ceramics have good performance and high availability, which can further improve the performance of the machine.High-purity alumina ceramics can be made into
2020-10-14