ALUMINA CERAMIC GRINDING MEDIA

Alumina Ceramic Grinding Media, as the name suggests, is used for particle size reduction by facilitating interaction between the media and the material in a closed space. 90% of alumina ceramic products are used for wear-resistant applications. 
 

Alumina Ceramic Grinding Media has a high hardness which ensures prolonged resistance to chipping and cracking. Ceramic grinding balls and linings are suitable for applications where highly efficient grinding must be paired with low grinding media abrasion. Ceramic ball mill media is absolutely essential in many processes, for instance in medical or pharmaceutical applications, in order to prevent undesired impurities in the grinding materials used.
 

Alumina Ceramic Grinding Media are also suited for use in processes where mixing and dispersing effects play an important role. Media replacement and make-up charge levels drop significantly with the use of Mingxing Ceramics alumina grinding media. Alumina is the most common ceramic material used for ceramic grinding balls and ceramic ball mill media.

Alumina Ceramic Grinding Media Specifications

Material

95% Alumina ceramics

99% Alumina ceramics

Density

3.6-3.75g/cm3  

3.9-3.92g/cm3  

Machining accuracy

±0.5

±0.5

Performance

wear-resisting and high hardness

wear-resisting and high hardness

Application

grinding 

grinding 

Advantages of Alumina Ceramic Grinding Media

● High wear resistance
● Low iron contamination
● Low heat built up
● Non-corrosive
● Lower density and higher hardness offer energy savings
● Extended mill life
● Reduced Noise pollution

Application of Alumina Ceramic Grinding Media

● Silica sand manufacturing
● Decorative ceramic tile manufacturing
● White cement manufacturing
● Non-metallic mineral grinding
● Rods and media balls for wear-resistant applications
● Inert tower packing for chemical processing
● Filler material for plastic and paper product
● Alumina Grinding Media/Ceramic Grinding Balls/Ceramic Ball Mill Media are highly efficient grinding media for attritors and ball mills. Because these are suitable for dry and wet grinding in ball mills.
● For grinding applications of Ceramic
● Paints and Primers
● Minerals Cement
● Plastic
● Food and Biotech

PRODUCT CATEGORIES

Related Blogs

More >>
  • Positive Temperature Coefficient is a kind of semiconductor thermal ceramics. Its characteristic is sensitive to temperature. It shows negative resistance when it is lower than the Curie temperature; when it reaches the Curie temperature, its resistance value begins to increase sharply. When used as a heating material, it has the following superior characteristics: automatic constant temperature, no oxygen consumption, corrosion resistance, etc. PTC ceramics are mainly doped barium titanate semiconductor ceramics, which have relatively small ionization energy and can be thermally excited to generate conductive carriers at room temperature, thereby forming semiconductors.

    2020-11-11
  • Zirconia precision ceramic material has the characteristics of high temperature resistance, chemical corrosion resistance, oxidation resistance, wear resistance, large thermal expansion coefficient, small specific heat and thermal conductivity, and toughening characteristics after stabilization. The following Kezhong Ceramics is good for everyone Introduce the compressive strength and flexural strength of zirconia precision ceramics at high temperature.

    2020-11-03
  • ​With the development of materials science and the improvement of people's aesthetic awareness, all-ceramic restorations have been widely used because of their good aesthetic properties. Zirconia ceramic restorations have gradually become the first choice for restoration of posterior tooth defects due to their good mechanical properties, biocompatibility, less impact on the results of radiological medical examinations, and less wear on the natural teeth of the opposite jaw.

    2020-10-27
  • Alumina ceramic materials generally have fairly large elastic modulus, high hardness, high brittleness, and strong crack sensitivity. Therefore, alumina ceramics have certain processing difficulties. What should be paid attention to during the processing.

    2020-10-20
  • How alumina ceramics beat metalThe new generation of industrial parts is alumina ceramics, which will replace traditional metal parts, because ceramics have good performance and high availability, which can further improve the performance of the machine.High-purity alumina ceramics can be made into

    2020-10-14
REQUEST A QUOTE

About

The main products of Mingxing Ceramic include ceramic seal ring, ceramic shaft, alumina ceramic rod and discs, steatite ceramic insulator, etc. 

 

 +86-18067261222

 mxmanager@nbceramics.com
C21, Wanyang Zhongchuang City, Binhai New District, Fenghua District, Ningbo City

Products

Navigations

Contact Us

Ask a Question
Copyright © 2020 FenghuaMingxing Ceramics Factory All rights reserved. XML | SITEMAP